0item(s)

You have no items in your shopping cart.

Cloonch
Sit-Stand Stool

Shop Now

HAG Capisco
Chair

Shop Now

Video guides on how to assemble your desk and accessories.

Reset Procedure:
The video below shows the reset procedure to carry out if your standing desk will move slowly down but not up.  A safety device has cut in to protect the electronics for a variety of reasons and this needs a simple reset.  The procedure is the same with a standard or memory switch.
Stockholm Bundle:
The video below is a quick assembly guide for the Stockholm bundle which includes a memory switch, cable tray and cable ports and is for guidance only.  We show a different method from the instruction booklet for installing the control box, either way is fine, it's your choice.  Items in this video may differ from your chosen products and fixing methods may have been updated, we reserve the right to continuously improve our products and not update the video for every improvement.  Further videos below may address such improvements.  Please defer to the instruction booklet if in any doubt.
.
.
Extra Heavy Duty Control Box:  
IMPORTANT - Please watch this video before assembling your FRISKA Stockholm Extra Heavy Duty standing desk. The leg motor connector wires need to be specifically plugged into positions M1 and M2 of the control box, if M3 port is used the desk will malfunction and cannot be reset.

Instructions for the Stockholm Heavy-Duty standing desk are the same as a standard Stockholm, except the connections to the control box shown in this video.

.
Stockholm Micro Bundle: 
The video below is a quick assembly guide for the Stockholm Micro bundle which includes a memory switch, cable tray and cable port and is for guidance only.  Items in this video may differ from your chosen products and fixing methods may have been updated, we reserve the right to continuously improve our products and not update the video for every improvement.  Further videos below may address such improvements.  Please defer to the instruction booklet if in any doubt.
.

Stockholm Cable Tray: 

Below is a quick assembly guide on how to fit the updated Stockholm cable management tray (2022 onwards), this supersedes the previous cable tray and assembly method which may be shown in the desk assembly videos. 

.

.
Enhanced Anti-collision Sensor:  
Below is a quick assembly guide on how to fit the optional Enhanced Anti-collision Sensor.  Important note:  Ensure there screw-hole located in the middle of part 'C' (as per the instruction manual) is facing towards the front of the desk to allow the sensor to be installed forward of the cross beam.  If located behind the cross beam it will interfere with the control box location.
.
.
In-Desk Socket Outlet: 
Below is a quick video on how to fit your in-desk socket outlet.
.
.
Kalix Monitor Arm:
Below is a step by step guide to setting up your Kalix twin monitor arms.
.

.
AKTIV 1 Assembly:
Below is an assembly guide for the Aktiv 1 standing desk.
.
.
AKTIV 1 Memory control: 
Below is an operating guide for the Aktiv 1 memory control switch.
.
.
AKTIV 2 Assembly:
Below is an assembly guide for the Aktiv 2 standing desk.
.
.
AKTIV 2 Memory control: 
Below is an operating guide for the Aktiv 2 memory control switch.
.
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page